Wave total alkalinity increaser is used to increase the alkalinity of your spa water.

Spa water tends to lose Total Alkalinity (TA), within days of you filling your spa with fresh water. Low Total Alkalinity will result in damage to your spa equipment, pH fluctuation and bather discomfort, ideal levels are between 100ppm (parts per million) and 140ppm. Application: Pre-dissolve the required amount of Total Alkalinity Plus in a clean plastic bucket filled with warm water. Stir the solution until the granules are fully dissolved. Ensure that your spa circulation pump is turned on before slowly pouring the solution directly onto your spa water surface. Continue to run your spa circulation pump for at least 15 minutes. Re-test your spa water and repeat dosage until a Total Alkalinity reading of between 100ppm and 140ppm is achieved. Allow 15 minutes before using your spa.

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.